Article Writer

How to grout ceramic tiles is the next step of installation of tiles. You can save your tiles after grouting which is really a simple process. How to grout ceramic tiles uses modern techniques to grout ceramic tiles; we have to add water in the grout powder with the ratio instructed by the instructor. You can use both sanded and non-sanded grouts to fill up the gaps of tiles to complete the process of how to grout ceramic tiles. Choose the same color of the grout or in contrast is your choice in the process of how to grout ceramic tiles.

Be sure that installed tiles have dried completely because when you apply grout material in the process of how to grout tiles, you need to grout ceramic tiles by force; this force can displace the installed tiles, if they did not get proper time to dry. Some ground surfaces take more than two days to get proper dryness, so give them proper time to dry up well to complete the process how to grout ceramic tiles.

For sanded grout, consider timing and keep wet and dry grout mixture in separate buckets. For non-sanded grouting, mix powder with water to get mixture which could sustain in upright position to continue process of how to grout tiles. For less than 1/8” sized gap we use sanded and for more than this size we normally use non-sanded grout.

Next step is to check absorption capacity of the tiles as we have to thwart the water in the grout into the absorbent tiles, this will cause jagged curing. Clean all the gaps from the dust and dirt before applying grout release coating in the process of how to grout tiles.

Use float trowel to apply grout mixture in the process, how to grout ceramic tiles, between gaps of tiles to fill them properly. Process, how to grout ceramic tiles, uses float along with filling process to remove the excessive quantity of material. Use dry powder or sprinkle it on the surface and then clean up with the sponge to get even surface.

How to grout ceramic tiles involves grout materials which are strong respondents to temperature so keep in mind to avoid strong heat or cooling in the tiled area otherwise uneven and discolored results will be founded. Ventilation is the positive course to be used during the process of how to grout ceramic tiles. After the due time clean the tiles with wet sponges to wipe out all the dirt, stains and grime. Terry cloth rags are used to polish the floors after getting grout dry at the final stage of how to grout ceramic tiles. Do not use strong cleansers on the tiles for cleaning because the shiny look will turn to fade and colors will also being affected by their use. Damp curing is the next step to be followed to avoid moist and improve the potency of grout. We can do this process of how to grout ceramic tiles by covering floor with craft type paper for three days or wiping the joints with damp sponge after every 24 hours for three days continuously.

Try to remove the excessive grout from the ceramic tiles in the process of how to grout ceramic tiles. Use solution in the spray bottle to seal the surface of the tiles to complete the steps in how to grout tiles.